082851O-HANIF STORE

AIR MOTOR NA..NA.NA
ANTI SPLASHING TAPES FOR SHIPS ENGINE ROOM, (500 mm WIDTH X L- 10 mtr) & NA..NA.871805
ANTI SPLASHING TAPES FOR SHIPS ENGINE ROOM (250mm WIDTH X L- 10 mtr) NA..NA.871807
ANTI SPLASHING TAPES FOR SHIPS ENGINE ROOM, (500 mm WIDTH X L- 10 mtr) & NA..NA.871805
SATINLESS STEEL BOLT WITH NUT- (M6*60), NA..NA.692517
SATINLESS STEEL BOLT WITH NUT- (M10*60) NA..NA.692715
SATINLESS STEEL BOLT WITH NUT- (M12*60) NA..NA.692754
BOLTS AND NUTS – SET NA..NA.692925
BOLTS AND NUTS – SET NA..NA.692975
PUNCHING TOOL SET DIES & TABLE6-38MM 16’S NA..NA.613056
CENTRE PUNCH SET NA..NA.613065
Spare Parts For Jet Chisel, Model JEX-24, Front washer, Parts no: TP02250 NA..NA.590463
PNEUMATIC ANGLE GRINDER WHEEL DIAM-100mm NA..NA.590301
“FLAME RETARDANT CURTAINS/ WORKSHOP FIRE CURTAINS;2X12 PINCH PLATED#
D10010” NA..NA.150716
ELECTRIC BLOWER, MODEL:EFI75, VOLTAGE: 115V, MOTOR:3/4 HP, FREQUENCY: 60 HZ NA..NA.591501
METRIC COARSE THREAD HAND TAPS, 3’S/SET, HIGH SPEED STEEL NA..NA.631068
METRIC COARSE THREAD HAND TAPS, 3’S/SET, HIGH SPEED STEEL NA..NA.631069
METRIC COARSE THREAD HAND TAPS, 3’S/SET, HIGH SPEED STEEL NA..NA.631070
SINGLE POINT TOOLS WITH CEMENTED CARBIDE TIP NA..NA.632715
“TOOL WITH CARBIDE TIP
SINGLE, #35-2 STRAIGHT
16X16X120MM” NA..NA.632729
SINGLE POINT TOOLS WITH CEMENTED CARBIDE TIP NA..NA.632742
THICKNESS GAUGE, TYPE: 75A25 NA..NA.650562
DEVCON FASSTIK NA..NA.812294
Loctide NA..NA.812758
COUPLER QUICK-CONNECT, STAINLESS STEEL 30SH 3/8″ NA..NA.351222
COUPLER QUICK-CONNECT, SINGLE END SHUT OFF, ST.STEEL 30 PM PT-3/8 NA..NA.351353
STRAIGHT PINCH AND CHISEL END BARS NA..NA.612867
GALVANIZED IRON WIRE NA..NA.671116
SEIZING WIRE (T=1.6mm) NA..NA.671118
MASTER KEY SYSTEM PADLOCK, (50 mm) NA..NA.490512
MASTER KEY SYSTEM KEY ONLY, (50mm) NA..NA.490509
HEXAGON NUT DRIVER SET NA..NA.612366
BALL PEIN HAMMER NA..NA.612502
Ball Pein Hammer with handle (450gm) NA..NA.612504
BALL PEIN HAMMER NA..NA.612506
DOWL PIN SET NA..NA.695651
HOSE BAND STAINLESS STEEL, 13-20MM NA..NA.614067
HOSE BAND STAINLESS STEEL, 15-24MM NA..NA.614068
BUTTERFLY V/V,WAFER TYPE WITH WORM GEAR ACTUATOR, NOMINAL SIZE: 80mm, 5K 80, MUST BE 04 NOS HOLE BODILY THREADED (THREAD SIZE: M16X2.0) NA..NA.752213
MARINE CAST IRON, SCREW DOWN CHECK, ANGLE V/V, 5K-100 NA..NA.751119
Marine Cast Iron 5Kgf/cm2 Screw Down Check (JIS F7353 100) NA..NA.751104
MARINE CAST IRON SCREW DOWN CHECK, ANGLE V/V, 5K-200 NA..NA.751122
MARINE BRONZE, 16 kgf/cm2, SCREW DOWN CHECK, ANGLE VALVE NA..NA.751083
VISE JAWS ONLY (FOR PARALLEL BENCH VISES SQUARE CYLINDER), L-152mm, W-28mm, T- 13 mm, MATERIAL: SPECIAL ALLOY STEEL NA..NA.613793
HYDRAULIC PIPE BENDERS PORTABLE, STANDARD ATTACHED SHOES 20A,25A,32A,40A &50A NA..NA.613711
VALVE SEAT CUTTER, 1 INCH TO 4 INCH COMPLETE NA..NA.633451
EYEBOLT, STAINLESS STEEL, M8 NA..NA.692201
EYEBOLT, STAINLESS STEEL, M10 NA..NA.692202
EYEBOLT, STAINLESS STEEL,M12 NA..NA.692203
EYEBOLT, STAINLESS STEEL,M16 NA..NA.692204
EYE NUTS, STAINLESS STEEL, M8 NA..NA.693401
EYE NUTS, STAINLESS STEEL, M10 NA..NA.693402
EYE NUTS, STAINLESS STEEL,M12 NA..NA.693403
EYE NUTS, STAINLESS STEEL,M16 NA..NA.693404